If you are in the Washington State area, you must be certainly concerned about the heavy rainfall season. The intense pouring can cause irreparable water damage to your house and you may have to do a lot of repairs to fix it. Handling home flooding in Washington State can be extremely overwhelming but we have got you covered. This article will provide you some ways for Washington State water damage prevention. So, keep reading and take notes.
Tips For Washington State Water Damage Prevention
Here are some flooding solutions Washington homeowners can use to keep their place safe from leaks and water damages.
Clean The Drains And The Gutters
If the gutters and drain outside your property are blocked or have something stuck in them, the heavy rain can easily cause flooding. You need the water to drain away from your home. So, check the gutters and drains in your driveway, yard, or any other place outside. Make sure there are no leaves, debris, or other garbage stuck in them causing them to be unclogged. Or else the water can collect near the foundation of your house and damage it.
Install Backwater Valves In The Plumbing Pipes
Another tip for Washington State water damage prevention is to install backwater valves inside the plumbing of your home. These devices prevent the water from heavy rain from accumulating and backing up into your home especially in the lower areas such as the basement. In this way, the water will flow away from your house and not enter it through sewage. This will save you from rain-related home repairs Washington. But if some water still gets in through the cracks, you can always call United Signature for repairs and renovation of your home and managing home leaks Pacific Northwest.
Getting The Basement Ready
Your basement is at the most risk of getting flooded with water and facing water damage. So, you need to prepare it. Put some water-resistant sealant on your basement walls which will add an extra layer of protection and prevent the water from seeping in through the leaks and cracks. You can also install flood sensors as a warning system.
Check And Clear Out The Roof Valleys
Roof valley is the point where the two slopes of the roof of your home meet at one place. This is the area where a large amount of water sets in during rainy season. So, you must ensure that this roof valley is clear from any leaks, debris, or any other stuff. This will prevent any water from staying there and help it in rolling off of the roof.
Put Some Drain Tiles Around Your House
One more way for Washington State water damage prevention for your foundation is to install drain tiles. These are pipes places under the ground and they make sure the water flows away from the foundation of your house. They are places all around the house to ensure no water gets into the basement or any crawl spaces. But if you do face any water damage still, contact United Signature for rain-related home repairs Washington and renovations.
Wrapping Up
So, these were some of the best Washington State water damage prevention tips for you. They will help you keep your home’s foundation, exterior, as well as interior safe from water destruction. In case you need help doing some repairs in preparation for this heavy rain season, get in touch with United Signature.
Check out this article on how to prepare your home for Seattle’s heavy rainfall and share the tips with your friends in Seattle.
